通用 12V 24V 100A ESC 997 Brush Motor Speed Controller 2-Ways Forward Backward Brake for RC Boat Marine Car Truck Tank

Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, tank etc. Suitable for 540, 550, 775, 795, 895, 997 brush motor. Automatically to find the neutral point, No throttle rang calibration required. Build in 5V/3A UBEC,It can drive 2PCS 25kg servos. Please Note: UBEC is a switching-Mode regulators, Please don`t use two ESC in parallel to power the receiver, otherwise they will be burned. Three Working modes （Be set by switch）: Mode 0: Forward/ Backward Model. Mode 1: Forward/Brake/Backward( neutral point brake ) Mode 2: Forward/Brake/Backward( Throttle stick move back brake ) LED Indicate: LED on-- Working normally LED flash-- The throttle stick is not at the neutral point LED flash fast-- Signal lost How to use: 1, Connect with receiver,motor,battery correctly. 2, Turn on the power of ECS, If the transmitter is off, LED will flash fast. 3, Push the throttle stick to the neutral point,Turn on the transmitter, and adjust the throttle trim until the LED on.that means the neutral position has been confirmed. -- Specification & Features -- - Working Voltage: 10.5V-26V ( LiPo 3S-6S ) - Remote control signal PWM: 800us-2200us - Neutral Point: 1500us - Build in 24PCS MOS FET - Continuous/Peak Current: forward 100A/640A, Backward 100A/640A - Rated Power: 1000W - Motor Limit: Drive ability at the same time at 12V: 3PCS 540, 3PCS 550, 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors Drive ability at the same time at 24V: 2PCS 775, 2PCS 795, 1PCS 895 or 1PCS 997 Motors -- Item Contains -- 1 piece of 100A ESC for Brush Motor ( Easy to use, no manual )

• Widely use for RC boat, RC tug boat, RC fishing bait boat, RC cruise, RC marine, RC car, tank etc.
• Suitable for 540, 550, 775, 795, 895, 997 brush motor.
• Automatically to find the neutral point, No throttle rang calibration required.
• Build in 5V/3A UBEC,It can drive 2PCS 25kg sovers.