Spax A2 Stainless Steel Washer Head Torx Wood Construction Screws 6mm 100mm

SPAX - Safety, quality and reliability since 1967. The branded product in the characteristic green packaging – produced at home in Germany and exported from there to all over the world: clever minds in Ennepetal constantly develop new ideas, expand the product range and establish the highest quality for DIY enthusiasts, professional processors, planners and architects all over the world. - This product is suitable for use: For easy screwing of steel parts and sheets to wood. Better sealing of joints even with deformed woods. High corrosion resistance thanks to stainless steel A2 - higher head pulling forces due to plate head. Optimum power transmission and clean fit even when processing overhead with SPAX bit T-Star plus T30 bit with guide pins. Effortless work and longer battery life: no pre-drilling (depending on wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile - Made in Germany. Approved by building authorities: European Technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114) - Box contents: 1 SPAX box, 100 pieces wood screws, T-Star plus, flat head, partial thread, 4CUT, stainless steel A2, material quality: 1.4567, thread diameter (Ød1) = 6 mm x Total length (Ls) 100 mm, partial thread length (LgT) = 61 mm, head diameter (Ødk): 13.6 mm, bit not included

• Use: For easy screwing of steel parts and sheets to wood. Better sealing of joints even with deformed woods. High corrosion resistance thanks to stainless steel A2
• Higher head pulling forces thanks to plate head. Optimum power transmission and clean fit even when processing overhead with SPAX bit T-Star plus T30 bit with guide pins
• Effortless work and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile
• Made in Germany: TÜV certified. Approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114)
• Box contents: 1 SPAX box, pack of 100 wood screws, T-Star plus, flat head, partial thread, 4Cut, stainless steel A2, material quality: 1.4567, thread diameter (Ød1) = 6 mm x total length (Ls) = 100 mm, partial thread length (LgT) = 61 mm, head diameter (Ødk): 13.6 mm, bit not included included