(2) Front Bearing & Seal Pump Parts Kit Fits Most Aqua-Flo Spa Hot Tub Pumps

This part is a Kit that features (1) PS-200 Seal and (2) Bearings that fit most motors that are mated to Aqua-Flo Pump Wet Ends The Professor silly Juice to seal the seal. This Seal is used in Most Aqua-Flo Wet Ends only look in our store for other seal & bearing kits. It is 1 1/4" Across the back of the Spring Seal part that goes onto the Impeller and the Ceramic & Rubber part that goes into the Volute or Wet End Back is 1 1/4". The Hole in both parts is about 5/8". Note: AquaFlo, Flo-Master, XP,XP2,XP2E, FMHP,FMCP,TMCP, FMVP To Install you should put silicon sealant on the back of the Metal part and gently push it into place. Also the rubber part can use a light coat of silicon to slide it into place in the impeller. We offer these alone, with The Professor's Silly Juice or with an Impeller in a kit so look at my eBay store. The bearing are standard fit for most motors with Aqua-Flo Wet ends. Visit our Store as we also offer these and other associated products and accessories for your Spa. Please note: When you have a seal leaking in most cases you will need an impellor because the leak caused water to get into the metal shaft area that the impeller is screwed onto and expands and damages the impellor. The Hot Tub Professor offers How To Installation Videos on Seals and Impellers. Note: Some 48 Frame Motors use a Smaller enter hole 15.9mm bearing be sure before you order..

• Kit fits Most Xp, Xp2, Xp2E, FMHP, FMCP, TMCP, FMVP Aqua-Flo Pumps
• Includes Silicon, Seal install Tool and (2) Bearings in Kit..
• Note" Some 48 Frame Motors use a Smaller enter hole 15.9mm bearing be sure before you order..
• How To Video on YouTube look for: "Aqua-Flo 200 seal and Impeller How To Hot Tub Pump How To Spa Guy"
• Fits Most Spa Aqua-Flo Pump Wet Ends and Motors..