Common Rail Injector Tester Kit, 600 Bar 8000PSI CR-C Multifunction Diesel Injector Nozzle Pop Pressure Tester with S60H Fuel Nozzle, Drive Fuel Repair Tool for Diesel Engine Vehicle

SpecificationsColor: Blue, BlackMaterial: Metal, Alloy, Nylon, PlasticProcess: Injection Molding, Machine ProcessingAssembly Required: YesPower Source: Corded ElectricPlug Type: US StandardVoltage: 110VMeasured Value Range: 0-60mpaMaximum Test Pressure: 40mpaOil Cup Capacity: 1L/0.26GalPower Cord Length: 1.5m/4.92ftCR-C Common Rail Injector Tester Size: 24.5*19*10.5cm/9.65*7.48*4.13inS60H Fuel Nozzle Tester Size: 42*38cm/16.54*14.96inPackage Size: 77*27*23cm/30.31*10.63*9.06inGross Weight: 6.14kg/13.54lbsNet Weight: 6kg/13.23lbsPackage Included1* CR-C Common Rail Injector Tester1* S60H Fuel Nozzle Tester1* Pressure Lever1* Oil Cup2* Oil Pipes6* Conversion Harnesses1* English ManualOther Accessories for UseNotes1.Please check the size carefully before ordering.2.Before first use, please rinse the tester.3.Please note that with CRC you can measure common rail injectors and S60H alone can measure common mechanical injectors. Please note that CR-C is not suitable for piezo injectors.4.Please read the product manual carefully and pay attention to the safety matters in it.5.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• Made to Last: Premium metal, alloy, nylon, and plastic with injection molding and machine processing processes make this product resistant to abrasion, impact, and corrosion, ensuring excellent durability.
• Superior Tests Ability: This product uses a precision dual scale gauge with a measuring range of 0-60mpa and a maximum test pressure of up to 40mpa. The kit is ideal for checking automotive diesel injectors as it is capable of completing correct injector opening pressure tests, leakage tests, chattering tests, spray pattern checks, and atomization.
• Thoughtful Oil Cup: The clear cup can hold 0.26Gal of fuel, which is not only convenient for you to observe the change of fuel level in real time but also reduces the trouble of adding fuel frequently. Equipped with a filter to effectively remove impurities, it contributes to the accuracy and stability of the test.
• Simple Operation: You need to press the lever after filling the oil to remove the air in the tester, then connect your oil pipe, then press the lever again, connect the injector nozzle to the tube, and start the test.
• Wide Application: This product is widely used for the calibration of fuel injectors for automobiles, tractors, and diesel engines. It can be used to inspect and measure the opening pressure of injection, atomization quality, injection angle, and needle valve sealing of diesel injector assembly.