Uetmulik Adjustable Bed Richmat Non-Universal Wireless HJH55 Remote and HJC18 Control Box Replacement

The adjustable bed HJH55 remote and HJC18 control box replacement made by richmat. The remote and control box together is that you can avoid the control box and remote produced at different times not working properly due to chip incompatibility. Please Note: This richmat HJH55 remote and control box are NOT universally compatible. There are several versions of this remote model HJH55, different versions have different functions and buttons, please match your remote button, if the buttons are different from ours, this product will not replace your remote. The lift motor connector of the control box is 8 pins, if the connector of the motor is 4 pins, it will not work properly. The massage motor connector of the control box is 2 pins(round and flat).The remote will not come paired, so please follow one of these instructions or use your bed's current pairing instructions::Method 1:Step 1: On the remote press and hold the "head up" button and the "foot up" button at the same time for 10 seconds.Step 2: Push the button on the side of the control box underneath the bed where is indicates reset coding (usually it is the button indicated by the word "Learn" or "Reset Coding". Do not press and hold the side button, just press and release.Step 3: Once you hear beeps that will indicate that the remote is synced.Method 2:Step 1: On the remote press and hold the "head down" button and the "foot up" button at the same time for 10 seconds. Step 2: Push the button on the side of the control box underneath the bed where is indicates reset coding (usually it is the button indicated by the word "Learn" or "Reset Coding". Do not press and hold the side button, just press and release.Step 3: Once you hear beeps that will indicate that the remote is synced.Method 3:Step 1: On the remote press and hold the "head up" button and the "foot down" button at the same time for 10 seconds.Step 2: Push the button on the side of the control box underneath the bed where is indicates reset coding (usually it is the button indicated by the word "Learn" or "Reset Coding". Do not press and hold the side button, just press and release.Step 3: Once you hear beeps that will indicate that the remote is synced.Method 4:Step 1: On the remote press and hold the "head down" button and the "foot down" button at the same time for 10 seconds.Step 2: Push the button on the side of the control box underneath the bed where is indicates reset coding (usually it is the button indicated by the word "Learn" or "Reset Coding". Do not press and hold the side button, just press and release.Step 3: Once you hear beeps that will indicate that the remote is synced.

• The adjustable bed HJH55 remote and HJC18 control box replacement made by richmat
• The remote and control box together is that you can avoid the control box and remote produced at different times not working properly due to chip incompatibility, Please attempt the following 4 matching methods, you can proceed according to the steps
• This richmat HJH55 remote and control box are NOT universally compatible. There are several versions of this remote model HJH55, different versions have different functions and buttons, please match your remote button, if the buttons are different from ours, this product will not replace your remote
• The lift motor connector of the control box is 8 pins, if the connector of the motor is 4 pins, it will not work properly. The massage motor connector of the control box is 2 pins(round and flat)
• The remote will not come paired, so please follow one of these instructions or use your bed's current pairing instructions, the remote used 2 AAA batteries, which need to be purchased separately