TECHTONGDA Wood Pellet Machine Press Pelletizer for Sawdust, Corn Straw, Peanut Shells, Rice Husks with 2 Head Rollers 8MM Holes Plate 7500W 220V

Parameters Voltage: 220V three-phase electricity Power: 7500W Production: 60KG/H Wood chip particle combustion value: 3000-4300 kcal/kg Feed hopper inside diameter: 11inch (28cm) Feed hopper outside diameter: 12.2inch (31cm) Depth of feeding hopper: 8.3in(21cm) Outlet size: 8.86in*6.1inch (22.5*15.5cm)

• [Application] The wood pellet machine is equipped with a grinding disc of 8mm holes. Other hole sizes can be customized. It is used for producing wood pellet using, sawdust, corn straw powder, cotton stalks powder, peanut shells powder, rice husks powder as raw material. Please remember to grind the straw, stalks and shells first.
• [Steel Roller and Disc] This compressing rollers of the wood pellet pressing machine and grinding disc which are made of high quality steel which is through high temperature quenching and becomes better in resistance to wear and high temperature.
• [Powerful Motor] The wood chip particle machine is equipped with a 7500W motor with production of 60KG/H. The motor is 220V. No plug included. An circuit breaker is included. It is recommended to connect the machine to the Circuit Breaker Box in your house.
• [Excellent Design] The wood Pelletizer is made of steel with paint sprayed on the surface for long service life. Big size inlet and outlet for easy input and easy discharge. With large size feet for stability.
• [Note] Before starting the machine, take off the hopper to check if the roller is balanced. If not, you can make adjustment by the 2 screws on the side. Before use the machine, please remove the flat 8-shaped rubber ring to prevent oil leakage.