Gas Powered Post Hole Digger, 52CC Heavy Duty Petrol Earth Auger Fence Post Hole Borer with 4"6"8" Digger Bit+ 30cm Extension Rod, for Fence Ground Drill

DescriptionThe traditional way of digging a hole with a hoe is time-consuming, labor-intensive, and prone to backache at the end of the process. Advancement in technology has brought about labor-saving and professional digging equipment that is ready to liberate you from the hassle of manual digging. Equipped with a powerful fuel engine, this auger post hole digger digs more efficiently than manual trenching, saving valuable time and making digging a pleasure.ApplicationIt can be drilled in epidermal turf and clay, and can be used for tree planting holes, fence stakes, greenhouse stakes, fiber optic cable pole stakes, tree fertilization stakes, etc. Starting Method1. Turn on the switch.2. Before each start, press the oil bubble to suction oil into the oil pipe.3. When the cold machine starts, close the damper switch first.4. When ignition is heard, pull the start handle 5-8 times.5. Open the damper switch.Drill Installation Steps1. Connect the drive shaft.2. Insert the bolt.3. Put the pin to lock it.SpecificationMaterial: PP, Steel, Rubber, Aluminum, Iron, Carbon SteelColor: Orange, BlackEngine Type: Single Cylinder, 2-stroke, Air-cooledDisplacement: 52ccMixed Fuel: Gasoline:Two-stroke Oil (25:1)Ignition System: C.D.I.Power: About 1.7kwHorsepower: 2.3hpFuel Tank Capacity: 1.2L/0.3galSpeed: 6500-8500r/minNo-load Speed: 2800-3200r/minFuel Consumption: 610g/kw·hDrill Diameter: 10cm/3.9inch, 15cm/5.9inch, 20cm/7.9inchDrill Length: 75cm/30inchShaft Size: 2*5cm/0.8*2inchEngine Size: 22.5*22*15cm/8.9*8.7*6inchDigger Whole Size: 50*23cm/20*9inchExtension Bar Length: 30cm/11.8inchDigger Package Size: 35*28.5*29cm/13.8*11.2*11.4inchDrill Package Size: 80.5*22*33cm/31.7*8.7*13inchDigger Gross Weight: 9kg/20lbsDigger Net Weight: 8.1kg/18lbsDrill Gross Weight: 9.5kg/21 lbsDrill Net Weight: 7.35kg/16.2lbsPackage Included1 x Auger Post Hole Digger1 x Extension Bar3 x Drills1 x Fuel Oil Mixing Bottle1 x Funnel1 x Spare Starter1 Pair x Goggles1 x English ManualTool Kit for AssemblyNotes1. The tank should be filled with a mixture of oil (gasoline: two-stroke oil = 25: 1). It should be used with two-stroke oil rather than four-stroke oil, otherwise accidents will occur. All oils are excluded.2. Please start the machine by pulling the starter quickly without stopping in the middle. 3. Press the oil bubble a few more times before starting. If there is oil coming in and out of the fuel line, which means oil has been supplied.4. Do not use on steep slopes exceeding 15°. 5. Please do not drill ice, frozen soil, sandy clay, and sand and gravel mixed soil, or the drill bit will bend easily.

• 【Great Power】With its two-stroke fuel engine, this digger has a powerful horsepower (about 1.7kw/2.3hp), which makes it easier and more efficient to dig holes to save more valuable time and make digging an enjoyable experience.
• 【Good Compatibility】We provide auger bits of 4", 6", and 8", and it is also compatible with 2.36", 3.15", 4", 6", 8", and 10" in diameter. With our gas powered post hole digger, you can install different sizes of augers depending on your work requirements.
• 【Cost Saving】The high-quality pump membrane carburetor makes the gasoline burn fully at work, and the fuel consumption is only 610g/kw.h, which can save your cost.
• 【Build to Last】The exquisite aluminum alloy, PP, manganese steel, and spray molding process make this gas powered post hole digger wear-resistant, corrosion-resistant, less prone to rust and deformation, and can maintain good condition even in harsh outdoor environments.
• 【Safety Guard】It has large cooling holes and uses air cooling to ensure continuous operation while extending its service time. This gas powered post hole digger package includes a complimentary pair of goggles to protect your eyes from impurities generated during work.