Outdoor Misting Cooling System with Flexible Brass Sprayers, Misting System for Patio with Mute Pump, DIY Micro Drip Irrigation System for Garden, Lawn, Home Irrigation(24m(80ft))

Specification:- PE Hose + Number of nozzles: 24m(80ft) + 28 nozzles , 27m(90ft) + 32 nozzles , 30m(100ft) + 36 nozzles , 33m(110ft) + 40 nozzles , 36m(120ft) + 44 nozzles , 40m(130ft) + 48 nozzles , 43m(140ft) + 52 nozzles , 46m(150ft) + 56 nozzles , 50m(160ft)+ 60 nozzles , - Color: Black- Nozzle material: brass- Orifice diameter: 0.1mm- Pump Voltage: DC24V- Pipe diameter: 6mm- Work pressure: 70PSI- Work current: ≤1.0A- Work flow: ≥0.8L/min- Greatest pressure: 130PSl+10- Maximum current: ≤1.5A- Temperature: ≤30°C- Noise≤50dBFeatures:- Equipped with 24v small mute pump, the atomization is more sufficient;- Perfect for cooling your outdoor living areas;- Can be widely used in plant humidification, cooling, dust reduction, landscaping, salt spray test and other artificial fog.Installation Steps:1. Connect the adapter to the water tap.2. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.3. Using cable tie to fixed the pipe.4. Turn on the tap slightly until jets are working, enjoy the cooling misting system.5. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.6. It is recommended that the coolant system be installed at the height of 2.5m-3.0m.7. Water filters are required where hard water is used. Over time, hard water and minerals can block the nozzle openings!

• Premium material: The nozzles are made of brass body, they are tough, not easy to rust; The irrigation tubing is made from high quality, UV resistant PU; The misting set can serve you for a long time
• Equipped with 24v small mute pump, the atomization is more sufficient
• Flexibility: The extender can be bent to make any angle as you like, provides exact directional mist control
• Easy to use and install: If you want to make the hose connected, you need to put the hose into some hot water for 10 seconds before assembling;It will be easier to connect and will be very tight once it cools down
• Application range: Wetting and rust removal; Air humidification; Chemical treatment; Chemical spraying; Liquid spraying; Tablet coating; Flue gas evaporative cooling; Unit cooling; Fruit wax spray; Ceramic tile glazing; Factory humidification; Salt fog test; Artificial fog; Dust removal at construction sites; cooling of livestock farms; Humidification in other places