5x4.5/5x114.3 20mm (0.8") Hubcentric Wheel Spacers 4pcs 66.1mm Bore 12x1.25 Studs Black Compatible for Nissan 240SX Sentra 350z 370z Altima Maxima Rogue Murano Infiniti G35 FX35 FX50 Q60

WARNING: Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to: 1) Shorten the factory studs 2) Purchase a set of shorter studs and replace them with the factory studs. 3) The back of your wheels need to have the open slots (cavities)(at least 2" width and 1/4" deep) between mounting holes for installation of these spacers.These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket. Verify this before purchasing. Compatible for: 1995-1998 Nissan 240SX (Will NOT fit Base Models) 1987-1996 Nissan 300ZX 2003-2008 Nissan 350Z 2009-2024 Nissan 370Z 2002-2024 Nissan Altima 1995-2024 Nissan Maxima 2003-2024 Nissan Murano 2008-2024 Nissan Rogue 2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY) 2012-2024 Nissan Sentra 2003-2012 Infiniti FX35 2003-2008 Infiniti FX45 2009-2013 Infiniti FX50 2003-2008 Infiniti G35 1996-2001 Infiniti I30 2002-2004 Infiniti I35 1993-1997 Infiniti J30 1990-1992 Infiniti M30 2003-2010 Infiniti M45 1990-2006 Infiniti Q452013-2024 Infiniti Q60 Important Notes - It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle. - Buyer's need to measure the length of their vehicle's OEM/Factory wheel studs, to ensure it doesn't extend past the surface of the spacer - Installation should only be performed by a trained professional. - Make sure you get 6-8 FULL TURNS of the lug nuts before tightening - Avoid using an impact wrench; improper usage may cause damage to components - Check and re-torque all lug nuts after 25-50 miles of driving

• Please check your vehicle's bolt pattern and thread as the same as this item, check your hub is samller than 66.1mm before order it.
• CNC Machined using high quality aerospace 6061 T6 aluminum for durability and fit.
• Set of 4 wheel spacers.Bolt pattern:5x4.5/5x114.3.Hub bore:66.1mm.Spacer thickness:0.8"(20mm).Stud/nut thread Pitch:M12x1.25
• Note: Will not fit for Infiniti G37,also not fit factory OEM wheels, only fit for aftermarket wheels. If you buy them for factory OEM wheels, you may should change the studs.
• Designed to move the wheels further out from the hub, giving your vehicle a more aggressive stance & allows for better handling characteristics