5x4.5 to 5x4.5 Wheel Spacers 2 inch Wheel Adapter 5x114.3 to 5x114.3 1/2” Studs Compatible with Jeep Liberty, Wrangler, Compatible with Jeep Cherokee, Set of 4

Specification: 5x4.5" (5x114.3mm) to 5x4.5" (5x114.3mm) PCD (Vehicle/ Wheel Bolt Pattern), SAE 1/2"-20 Thread Pitch (34 ± 0.3 mm Thread Length), 87.1mm Hub Bore, 4pcs 2 inch PLEASE MAKE SURE: 1. Spacers' PCD/ Bolt Pattern 5x4.5" (5x114.3mm) = Your Vehicles' / Wheels' 2. Spacers' Thread Pitch 1/2"-20 = Your Vehicles' / Wheels' 3. Spacers' Thread Length 34 ± 0.3 mm >= Your Vehicles' 4. Spacers' Hub Bore 87.1mm >= Your Vehicles' Compatible with Jeep 1984-2013 Cherokee XJ KJ KK；1997-2006 Wrangler TJ； 1992-1998 Grand Cherokee ZJ；2001-2013 Liberty KJ KK Compatible with Ford 1985-1997 Aerostar；1992-2011 Crown Victoria；2006-2014 Edge 1990-2018 Explorer；2005-2017 Falcon；2008-2018 Flex 2004-2007 Freestyle；2005-2014 Mustang；2001-2012 Ranger 2008-2018 Taurus；2004-2017 Territory SX；1987-1990 Dodge Dakota IMPORTANT NOTES: Professional installation recommended. Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. Avoid an impact wrench; improper usage may cause lug nuts/bolts to break or loosen while driving, it will take potentially accident or injury. Make sure you get 6-8 turns before tightening. Re-torque all lug nuts / bolts after 25-50 miles of driving, then again 1-2,000 miles. The back of the adapter must sit flush against the vehicles hub. No rust on the inner of hub and wheel while installing the Hub centric wheel spacers.If the studs do pass the face of the adapter, you will need to grind/cut them shorter.

• ★5x4.5 Wheel Spacer SPECIFICATIONS: 4 pcs 2 (50 mm) Thickness /5 x 4.5 (5 x 114.3) Bolt Pattern /87.1 mm Hub / 1/2 x 20 Threaded Studs/Nuts/ Black anodized Finish
• ★5X4.5 XJ KJ KK Wheel Spacer PACKAGE INCLUDES: 4X Hubcentric Wheel Spacers (2 per unit), 2X High Strength Thread-locking (red), 2X Instructions, 2X Vehicle Stickers
• ★APPLICATIONS:Fits for 2006 2007 2008 2009 2010 2011 2012 for Liberty,1984-2001 for Cherokee,1987-2006 for Wrangler,1986-1992 for Comanche,1993 1994 1995 1996 1997 1998 for Grand for Cherokee
• ★BENEFITS: (I) CNC automatic processing ensure high accuracy and stability. (II)6061-T6 aluminum forged alloy material. (III)High quality pre-installed heat treated 10.9 grade studs. (IV) Zinc finish studs for better anti-rust effect. (V) Provides increased wheel and tire clearance
• ★Note: Please use a manual wrench instead of an electrical one. If the gap is too wide, hub centric rings added to original spacers will Work.