Electrolysis Water Machine Hydrogen Oxygen Generator Oxy-Hydrogen Flame Generator Water Welder Machine Equipment Principle (Large)

Product parameters Product name: electrolytic water machine Voltage: 220V to 12V Power: 200 - 300w Size: 20 * 30 * 35cm Weight: 6 - 8kg matters needing attention 1. It is normal to receive water inside the product, and we will conduct a sealing test before shipment. 2. Be sure to wait for more than half a minute before ignition to prevent explosion caused by tempering. 3. Do not close the spray gun valve after power on. If it is necessary to close it, be sure to close the spray gun valve first and disconnect the power immediately. 4. The burning gas is too hot to touch. Equipped with a tempering valve. Sodium hydroxide needs to be prepared by oneself, please be informed

• usage method 1. First dissolve sodium hydroxide in water to form a saturated solution.
• 2. Pour the liquid into the reactor along the copper tube, and the liquid height is about 3/5.
• 3. Screw on the copper tube and add more than 2/3 of water into the acrylic tube beside.
• 4. Open the spray gun valve. 5. Power on and wait for half a minute to empty the air.
• 6. Ignition is enough. 7. If you need to shut down the machine, you must turn off the spray gun first, and then turn off the power.