Phoenix Contact 5-Position Flush-Type Connector M12MS-5P180-M16 GEM1X

Caution: Avoid plugging in or disconnecting connectors under load. Improper use may cause damage. Ensure products are functioning properly and regularly inspect for damage. Only qualified electrical personnel should install and operate. Familiarize with electrical engineering basics and safety notes. Suitable for plant, controller, and electrical device applications. Protect outdoor connectors from environmental influences. Do not manipulate or improperly open assembled products. Use specified mating connectors. User responsible for third-party connections. Ground conductive connector housings for >50 V AC. Limit tensile load on connectors during cable laying. Observe technical data found on product, packaging, documentation, or online. Use recommended tools and protective caps. Properly connect protective or functional ground. Follow VDE 0100/1.97 411.1.3.2 and DIN EN 60 204/11.98 14.1.3 for combining circuits. Post warnings for connector warming in normal operation. 5-position connector, coded 'A', with overvoltage category III, rated surge voltage 1.5 kV AC, contact resistance 3 m, insulation resistance 100 M, nominal voltage UN 60 V, nominal current IN 4 A, max. conductor resistance 57.6 m/m, individual wire connection, no status display, tin-plated Cu litz wire conductor, 0.05 m cable length, 1.2 mm 0.07 mm wire diameter, single wire colors: brown, white, blue, black, gray, 0.34 mm cable cross-section, 7x 0.25 mm conductor structure, AWG 22 signal line, TPE wire insulation, 0.21 mm core insulation thickness, 300 V cable nominal voltage, 2000 V AC cable test voltage, 57.6 m/m cable resistance, 20 M*km cable insulation resistance, IP67 degree of protection, -25 C to -85 C operation ambient temperature, according to IEC 61076-2-101 standards, rear wall/screw mounting, item number 1238360, packing unit 50 pc, minimum order quantity 100 pc, product key ABQCGB, GTIN 4063151455521, 22.22 g weight per piece (excluding packing), fulfills EU RoHS substance requirements, EFUP-E for China RoHS, no REACH candidate substance above 0.1 wt%.