Phoenix Contact 5-Position M12 SPEEDCON Flush-Type Connector with 0.1m TPE Litz Wire

Caution: Avoid plugging in or disconnecting connectors under load. Improper use may cause damage. Ensure products are functioning properly and inspect regularly. Only qualified electrical personnel should install and operate. Suitable for plant, controller, and electrical device engineering. Protect outdoor connectors from environmental influences. Do not manipulate or improperly open assembled products. Use specified mating connectors. User responsible for third-party connections. Ground conductive connector housings for >50 V AC. Limit tensile load on connectors. Follow technical data guidelines. Use recommended tools. Protect unused connectors with caps. Ensure proper ground connection. Follow VDE and DIN standards. Connector may warm up; user responsible for warnings. 5 positions, 1 outlet, unshielded, A-coded. 1.5 kV AC surge voltage, 3 m contact resistance, 100 M insulation resistance, 60 V nominal voltage, 4 A nominal current, 57.6 m/m max. conductor resistance. TPE litz wire connection, no status display. Zinc die-cast, nickel-plated grip body, CuZn contact material, Au contact surface, PA 6.6 contact carrier. M16 thread, M12 head thread, SPEEDCON locking type. 0.1 m cable length, TPE litz wire, green, red, black, white, blue colors. 0.14 mm cross-section, tin-plated Cu litz wires, 0.14 mm signal line, TPE insulation, 0.21 mm core insulation, 300 V cable nominal voltage, 2000 V AC test voltage, 57.6 m/m cable resistance, 20 M*km insulation resistance. IP67 degree of protection, -25C to -85C (plug/socket), -25C to 90C (cable). According to IEC 61076-2-101. 10 pc packing unit, 100 pc min. order quantity. Fulfills EU RoHS, EFUP-E, no SVHC substances.