(Ø:5/16” - 7.93mm / L:10" - 254mm) Customizable Cartridge Heater MAXIWATT® - to Customize The Diameter and Length, Click ON The Blue Word MAXIWATT

Electrical cartridge heater of maximum durability. Cartridge Heater with high compressed load. Installation - Indicate with symbols the warning of hot surfaces. - Store as protected from moisture as possible. - Cut off the total current to the machine or mold. - Check that the machine or mould is at room temperature. - Introduction without any type of anti-seize paste. - Holes with H7 tolerance only - Attach regulation and cutting systems (thermocouples and regulators) - Insert 100% of the cartridge's sheath length. - Do not insert the connection cable inside the hole - Protect the cables and connection input from: shocks, splashes and excess material . - Do not pick up or carry the cartridge on the cable. - Keep the cable away from the heat source and protected from it. - Do not repair damaged cables. Replace them with new ones identical to the original ones. - Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order. - Never leave in operation without qualified human presence. - All exposed parts are compulsory for the safety of persons and goods. - Never connect outdoors.

• Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a cartridge heater manufacturer.