6 Heat Reclaim Radiators for six inch Dia. wood stove pipe. Flue stack exchanger

Set of six , 6 inch diameter ALUMINUM stovepipe heat reclaimer / radiator rings that reclaim heat from the hot stove pipe and radiate the heat into the room. They make close contact with your stack / pipe to draw more heat out of the pipe. Just like the aluminum fins on a motorcycle engine, they increase the area of heat dissipation. Heat is conducted into the radiator loops where the heat is transferred into the air. They are widely used as stovepipe heat exchangers that reclaim heat from the hot stove pipe and radiate the heat into the room. You get one lot of 6 radiators. They are made of 28 gauge high thermal conductivity aluminum, 1 ½ inches wide. They attach quickly and easily to your pipe or exhaust stack. No screws or tools needed. The ends lock into each other. It takes about 10 minutes to attach all six radiators. The bands conduct heat from the points of contact on the pipe to the loops in the band where the heat is released. They will last a lifetime. They never need maintenance. They are guaranteed to draw more heat from the pipe. You may put on as many bands as you have room for. One set of six bands covers 9 linear inches of exposed pipe. ***PLEASE*** measure your circumference with a flexible tape or string. (Circumference divided by 3.14 = diameter.) See other listings for more sizes. (3, 3.6, 4, 5, 7, and 8 inches. Just click on "TredNot" above.) . NOTE: The length of pipe in the picture is not part of the sale.

• Set of six aluminum Heat Extractors for standard 6 inch diameter stove pipe. (Approximately 19 inch circumference)
• Wrap-around and latch...Install in less than 10 minutes. No need to remove the pipe.
• Reclaim wasted heat going out the stack
• Stove Pipe heat exchangers release free heat into your room
• Made in the USA