1.5m length ventilation duct, hot air steam exhaust pipe, various flexible exhaust pipe fittings 5cm-9cm diameter(Width 5cm length1.5m)

1.5m -The adjustable length range is about 65cm-150cm There may be errors in manual measurement, please understand Length refers to the longest length after stretching. Material: aluminum foil Installation and replacement instructions Fitting Size Measurement: Before installation, measure the outside diameter of the exhaust port of the equipment to make sure it is within the applicable diameter range of the hose (5-9cm). Avoid loose leaks due to too loose or cannot be adjusted due to being too tight. Curve radius control: If you need to make a turn, keep a larger radius of curvature. Avoid bending at right angles or flattening the pipe body to avoid an increase in exhaust resistance and thus affect exhaust efficiency. Fixing the interface sealing: At the connection points, it is recommended to use heat-resistant aluminum foil tape for wrapping and sealing, and then fix it tightly with clamps or cable ties to prevent it from falling off and causing air leakage during use.

• Adjustable Diameter The applicable diameter range is 5-9cm. It can be cut or adjusted according to the actual size of the interface to suit the air outlet of various exhaust equipment.
• Material Composition: Made of hose composite material, the pipe body is flexible and suitable for installation scenarios with limited space or requiring turns.
• MULTIPURPOSE APPLICATION It can be used to discharge steam, hot air or odors from equipment such as cooker hoods, exhaust fans, dryers and water heaters.
• Length specification: Standard length is 1.5m. It can be cut according to the actual distance of use, which reduces the hassle of joining.
• Connection method: both ends are non-standard interfaces. They can be mounted directly on the exhaust outlet and fixed using clamps or heat-resistant adhesive tape.