Decor Grates WLFT212-C 2-Inch by 12-Inch Wood Flush Mount Floor Register, Oak Cocoa

Product Description Decor Grates wood floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase. From the Manufacturer These wood flushmount floor registers are designed to lay flat with the surface of your 3/4 inch wood floor and for best results the register should be installed with the wood floor. Built with the finest materials that go through the highest quality assurance process. Our classic designs will enhance any room’s décor. Easy to install and will give you years of trouble free operation.

• Oak Wood Flushmount Grate - Cocoa Lacquer Finish - Louvered Design
• Designed to work with 3/4" tongue and groove hardwood strip flooring
• Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic. This is not a cheaper option, it’s the best option.
• Installation instructions included in each package - please review before installing
• Wood grain pattern and shade may vary
• Useful Tip: Because of increased floor cleaning during this pandemic, we recommend removing your steel floor registers before cleaning your floor. The floor registers can simply be cleaned using a dry cloth. Frequent exposure to water and cleaning detergents will accelerate the rusting process
• Please note the industry standard for all vent openings referred as 2 inches wide is actually 2 ½ inches. Accordingly, most floor registers advertised as 2 inches wide will have a damper box, which is approximately 2 ¼ inches wide. Please measure your vent opening before ordering.