COLORBERRY Geode Resin (One to One Resin) 1:1 - Premium cast Resin/Epoxy Resin Created in Germany - Resin, Pouring, Fluoride Art 2.000ml (1.000ml Resin, 1.000ml Hardener)

This product is subject to specific safety warnings Causes serious eye damage Causes serious eye irritation Causes severe skin burns and eye damage Causes skin irritation Harmful if inhaled Harmful if swallowed Harmful to aquatic life with long lasting effects May cause an allergic skin reaction Toxic to aquatic life with long lasting effects

• 🎨 MIXING RATIO - You get the best resin mixing ratio by mixing 1:1. 1 part resin and 1 part hardener. So it can be poured onto your artwork like liquid honey and is optimally distributed.
• 🎨 CREATED IN GERMANY - It seemed almost impossible to find a manufacturer to manufacture COLORBERRY synthetic resin / casting resin in accordance with all the required regulations. But we did it.
• 🎨 THE WATCH TICKS - The working time of the resin is approx. 45 minutes at a room temperature between 22 ° C-25 ° C. It takes about 12-24 hours to fully stabilize at a stable room temperature.
• 🎨 BEST STORAGE - We recommend that you store the resin tightly closed and shady. It is best to store the epoxy resin at a constant room temperature of approx. 22 ° C in order to achieve the best possible durability.
• 🎨 A LOT TO DISCOVER - Check out the other COLORBERRY products. For the perfect resin picture you will find pigment pastes, glitter, dry pigment sets, as well as my own book on resin art.