Sunluway Outboard Trim/Tilt Pin Wrench MT0006-32mm x 4/4.5mm & MT0009 Pin Wrench-35mm x 6mm & 115225FS Trim Tilt Seal Kit for Yamaha, Suzuki, Honda

Outboard Trim/Tilt Pin Wrench MT0006-32mmx 4/4.5mm With Pins:3pcs S-4mm; 3 pcs S-4.5mm Replace Factory Tool:YB-06175-1A, YB-06548 Outboard Trim/Tilt Pin Wrench MT0009-35mm x 6mm With Pins:3pcs L-6mm Why you need the trim tilt pin wrench Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you remove the trim end cap with ease High Quality Material Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.. 115225FS Fast Strike Power Trim Tilt Seal Replacement Kit Replace Models: 60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D, 63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00, 63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D, 68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More. Material Made of high quality and environmental Rubber, No leaking and They can resist everything from ethanal to UV's to Oxidation from salt water environments. Performance # In a Freshwater application on a bass boat you will see the bolts have stretched and lost their torque from the hydraulic pressure in between the valve body and manifold. # In a salt water application salt and corrosion builds between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.

• MT0009-35mm x 6mm Outboard Trim/Tilt Pin Wrench---Fits the tilt caps on all Showa manufactured Trim/Tilt Units, compatibe for Yamaha F115-F150 (2004-2010), all I4 2.8L (F175-F200), 2-Strokes (115-225hp), all VMAX, all Suzuki, Honda, Johnson, and Evinrude.
• MT0006-32mm x 4/4.5mm Outboard Trim/Tilt Pin Wrench ---For Trim Caps on ALL SHOWA manufactured Trim/Tilt Units,All Suzuki, Honda,Johnson, Evinrude, compatibe for Yamaha ALL I4 2.8L (F175-F200),ALL VMAX, F115-F150, 2-Strokes (115-225hp)
• Trim/Tilt Pin Wrenches---To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim Tilt End Caps without damages and protect the steering cylinder
• 115225FS Fast Strike Power Trim Tilt Seal Kit---Fits for 1997 to Current Boat Power Trim Tilt Units 115HP, 150HP, 175HP, 200HP, 225HP (20" Shaft), 250HP (20" Shaft) & More. Also fits Suzuki, Honda, Tohatsu Nissan, All Showa Style 3 ram integrated trim tilt system. Does NOT compatibe for Yamaha 200-300hp 4 Stroke.
• Trim Tilt Seal Kit--Properly rebuilt these seals will outlive the life of the motor.These seal kit includes the 5 O-rings in between the valve body and manifold, if your unit is giving you issues the valve body needs to come off and the 5 O-rings need to be replaced.