Water Pump Housing for 2003-2011 Acura TSX, Honda Accord, Element, CRV (2.4L) - Replaces 17130-PNA-003, 17139-PK1-000, 17136-PNA-000, 19410-RAA-A00

Water Pump Housing Replacement for 2003-2011 Acura TSX, Honda Accord, Element & CRV (2.4L) – Replaces 17130-PNA-003, 17139-PK1-000, 17136-PNA-000, 19410-RAA-A00Is your Honda/Acura leaking coolant from the water pump housing? This is the #1 failure point in 2003-2011 models, causing dangerous overheating and engine damage. This direct replacement stops leaks permanently – with exact OEM fitment and no compromises.Why This Housing Fixes Your ProblemHonda’s original water pump housings fail due to:❌ Thermal stress cracks (from repeated heating/cooling cycles)❌ Seal degradation (causing coolant leaks at the thermostat housing)❌ Poor casting quality (leading to warping and leaks)Our replaced housing solves all issues:✅ Matches OEM bolt patterns (100% alignment with factory mounting points).✅ 1200 PSI rated (handles high-pressure coolant flow without failure).✅ Integrated rubber seals (prevents leaks even after 100+ heat cycles).Verify Your Model Before Ordering (Critical)Check your vehicle’s sticker (driver’s door jamb or engine bay).Confirm these specs:Engine: 2.4L V6 (NOT 1.7L/2.0L)Year: 2003-2011 (for Accord/Element/TSX; CRV: 2007-2009)Model: Accord, TSX, Element, or CRV (2.4L)If your vehicle matches ALL, this housing fits.Not for 2012+ models, 1.7L/2.0L engines, or non-Honda/Acura vehicles.Installation in 15 Minutes (No Experience Needed)Disconnect the battery (safety first!).Drain coolant (low reservoir only – no engine disassembly).Remove old housing (4 bolts, no special tools).Install new housing (align with factory gasket points).Refill coolant and test.Done. No welding, soldering, or engine work required.Technical SpecsOEM Part Numbers: 17130-PNA-003, 17139-PK1-000, 17136-PNA-000, 19410-RAA-A00Material: Cast aluminum (OEM-equivalent)Pressure Rating: 1200 PSITemperature Range: -40°F to 250°FIncluded: 1x water pump housingWhy Mechanics Choose This✅ 100% OEM bolt pattern – fits perfectly with factory brackets.✅ 1200 PSI rating – outperforms weak plastic alternatives.✅ Pre-sealed gasket – prevents leaks from day one.✅ Tested on 3,000+ vehicles – zero verified failures.Safety Warning⚠️ ALWAYS DRAIN COOLANT BEFORE INSTALLATION. Never work with coolant under pressure – risks burns and engine damage. Disconnect battery first.

• 【⚠️ STOPS ENGINE OVERHEATING FROM COOLANT LEAKS】 Fixes the #1 failure in 2003-2011 Acura TSX, Honda Accord, Element, and CRV (2.4L): cracked water pump housings causing coolant leaks. Replaces OEM parts 17130-PNA-003, 17139-PK1-000, 17136-PNA-000, 19410-RAA-A00 with identical sealing surfaces and bolt patterns – no more overheating or engine damage.
• 【✅ 100% FITMENT FOR THESE MODELS (2003-2011)】 Directly replaces OEM parts on: ✅ Acura TSX: 2003-2011 ✅ Honda Accord: 2003-2011 ✅ Honda Element: 2003-2011 ✅ Honda CRV (2.4L): 2007-2009 Not for 1.7L/2.0L engines or 2012+ models.
• 【🔧 15-MINUTE INSTALLATION – NO SPECIAL TOOLS】 Pre-sealed gasket + OEM-style bolt holes. Remove old housing → install new → torque bolts. Includes torque specs and alignment diagram. No coolant draining or engine disassembly required.
• 【🛡️ INDUSTRIAL-GRAD CONSTRUCTION (1200 PSI RATED)】 Cast aluminum housing + reinforced rubber seals withstands 1200 PSI pressure and -40°F to 250°F temperatures. Prevents warping, cracking, and leaks – engineered to exceed OEM durability.
• 【💡 PREVENTS EXPENSIVE ENGINE DAMAGE】 Maintains perfect coolant flow to avoid overheating, piston damage, and head gasket failure. Verified on 3,000+ Honda/Acura vehicles with 0 leaks reported.