Coolant Pressure Tester kit 14PCS Automotive Radiator Pressure Tester Kit Car Leak Detector Tool Auto Cooling System Coolant Vacuum Purge Vacuum Type Cooling System Kit

Cooling System Pressure Test Special Features 6.Pressure fill all cavities to avoid air bubbles. Use Instruction 1.Open the radiator cap. Before open it, make sure it's cooling state. 2.Choose applicable cap adaptor for vehicle. 3.Fasten the radiator opening meanwhile check if the gasket is applicable. 4.Insert the joint into adaptor. 5.Take out the hand held pump, pressurize to about 15PSI-20PSI 6.Check pressure gauge: (1) If the gauge pointer maintain in several minutes, the system is normal to work; (2) if the pointer drops, the system has crack due to pressure damage, you should maintain it and make sure the system can still work after the maintenance. 7.After the check, release pressure from decompression valve till the gauge return to zero. 8.Before you collecting tools: (1) Insert the adaptor into joint, pressurize a few times, expel residual water and air in the hand held pump, then you can collect; (2) Inject gas into the tail air inlet of the hand held pump, lubricate the piston of the tube.Then insert adaptor into joint, pressurize a few times, expel residual gas in the hand held pump, then collect the tools. Package includes: 1 X Carrying Case 1 x Pressure testing pump with gauge 1 X Thermometer 4 X Chromed Steel Cap Adapters 8 X Anodized Aluminum Cap Adapters

• 1. Detect internal and external leaks
• 2. Work on most classic and modern vehicles
• 3. Locate system leaks from
• 4. Monitor pressure level drops, indicating leaks.
• 5. Test the cooling system to draw a vacuum on and drain the entire cooling system