Chimney Fan 100W Chimney Smoke Evacuator, Fireplace Exhaust Fan Flue Fan Chimney Draft Inducer Chimney Exhaust Fan for Fireplace,A

Product descriptionSolve Smoke ProblemsThese fans should be installed at the termination point of a solid fuel chimney or stack system and can be mounted on masonry or metal chimneys.Specification:Specification:Weight: 2.5kgVoltage: 110V (USA), 220V (Europe)Power: 100WSize: RED 13.5-21CM, GREEN 49-25.5CMColor: image colorPackage: 1 * induced draw fanInstallation method: Very simple: install the induced draft fan on the chimney exit, run a cable in a suitable place in the room and connect it to a single 220V power supply. (Please turn off the device when installing or removing to avoid electric shock.)Note:1. Turn off the power switch when installing or removing to avoid electric shock.2. The interface to the smoke outlet must be fastened with waterproof insulating tape.3. The installation at the interface with the chimney must be firm and the interface must be tightly integrated into the chimney for the best effect.

• 100W Chimney Fan for Flue Diameter 19-25.5cm.
• It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney.
• Stable and reliable pure copper motor.
• NOTE - The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
• Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. Not only will the smoke be discharged quickly, but it also has excellent performance.