Original Bamboo P2S External Exhaust Fan Kit with Filter for Bambu Lab P2S 3D Printer, Active Airflow Exhaust Ventilation Upgrade - Reduce VOC & Fumes, Improve Filtration & Print Environment

Tailored for Bambu Lab P2S 3D printers, this External Exhaust Fan Kit with air filter solves strict exhaust needs by routing fumes outdoors/designated areas. It features hassle-free installation using the original rear panel (no replacement needed) with included screws and a downloadable adapter. Smart control auto-starts for low-temp filaments (PLA/TPU/PVA), preserves heat for high-temp prints (ABS/PA), and auto-purifies post-print. Quiet, sealed design comes with essential tools; works with updated Bambu software. Backed by Bamboo lab wiki guides and support—clean, easy 3D printing.

• Official External Exhaust Solution for P2S: Designed specifically to add active exhaust functionality to your Bambu Lab P2S 3D printer, enabling external ventilation and chamber air routing for cleaner print environments. By installing the p2s filter element into the external exhaust fan to purify the exhausted air
• Enhanced Filtration & Fume Control: This p2s fan kit(Includes filter) works with adaptive airflow settings and external ducting options to help reduce airborne fumes, VOCs and ultrafine particles during demanding prints, especially with engineering-grade materials
• Seamless P2S Integration: Fully compatible with Bambu Studio/Bambu Handy/; once installed, the fan integrates into the P2S airflow control system with manual G-code or automated exhaust functions
• Hassle-Free Installation with Original Rear Panel: Reuse your P2S’s original rear panel (no need to replace it!) for a straightforward setup. The exhaust port is cleverly positioned on the right side of the Purge Chute. Simply fix the pre-printed adapter (model downloadable) to the original panel with 3 included M3x6 screws, then snap the fan assembly into the adapter. If you are using the upgraded rear panel: it is best to install the external exhaust fan kit in the middle position
• Note:1.If you own the P2S Printer without AMS, you will need to purchase an additional buffer accessory to use this exhaust fan kit;2.Before installation, you need to 3D print the external exhaust fan housing. Please refer to the Bamboo Lab wiki for detailed installation instructions
• Package List: External Exhaust Fan*1; External Exhaust Fan Circuit Board*1; 6-Pin Cable*1; BT2-5 Screw*26; M3×6 Screw*3; p2s external exhaust fan filter