3M Hot Melt Adhesive 3762 LM Q, Light Amber, 5/8" x 8", 11 lb/case

Product Description 3M Hot Melt Adhesive 3762 is a 100% solids, fast-setting hot melt adhesive designed for packaging and shipping applications. It is ideal for bonding corrugated fiberboard cartons, wood, particle board, chipboard and foam. From the Manufacturer Keep Production Flowing3M Hot Melt Adhesive 3762 is formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated and other fibrous substrates. It provides strong shear strength and low peel strength, which means your packages stay sealed and components stay bonded under most conditions.Economical and SafeA 30 second open time, along a 1/8" bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for packaging, woodworking, and applications that involve fibrous materials. We manufacture this product using 100% solids, thermoplastic resin for use with our 3M Hot Melt Applicators. As a low-volatile-organic (VOC) compound, this adhesive produces minimal odor when heated and helps support a comfortable work environment.Recommended ApplicationsGeneral packagingRecouperageRepacking chipboardPoint-of-PurchaseBeadboardDisplaysWoodworkingTrade exhibitsFoam insertsCraft applicationsBonding waxed surfacesThe Hot Melt AdvantageHot-melt adhesive applicators, commonly called “glue guns” are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250°F/ 121°C and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380°F/ 193°C. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Nozzles can be changed to dispense adhesive in a manner that meets various requirements; from a thin, wide strip for carton sealing, to a narrow, thicker bead for bonding wood, composites, or metal. Nozzles are typically metal and become extremely hot during use, which can quickly burn skin. Once dispensed from the applicator, the adhesive generally sets quickly, in most cases just a few seconds. Hot-melt applicators are widely used in industry, crafts, home, and work with materials ranging from paper and lace to wood and some metals.

• Aggressive hot tack rapidly achieves handling strength
• Short open time allows for fast assembly lines
• Securely bonds difficult to seal substrates such as lightly waxed surfaces
• Low viscosity prevents stringing even at fast production speeds
• Can be used for Assembly, assembling joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, gluing, packaging, adhering, and closing
• Aggressive hot tack rapidly achieves handling strength for packaging and other applications
• Medium open time allows for positioning and fit adjustment
• Securely bonds difficult to seal substrates such as lightly waxed surfaces
• Virtually invisible when bonded, eliminating unattractive mechanical fasteners and tape products
• Bonds to corrugated or paperboard cartons, wood, particle board, chipboard and cushioning foams