Left-Handed ISO S Boring Bar S12M-SEUCL 08 6760456

Boring bar with screw clamp, designed for a 75° rhombus positive insert (7.94mm diameter, 3.18mm thick), left-hand 93° end cutting, offset shank, made of steel without coolant hole, 12mm in diameter and 150mm long, suitable for taper and longitudinal boring with or without shoulders.

• Clamping Method: Clamping Type Code (MTP): Screw Clamping
• Connection Size - Inch: Connection diameter - inch (DCON MS): 0.472
• Connection Size - MM: Connection diameter - millimeter (DCON MS): 12
• Tool Orientation: Direction of tool: Left-Handed
• Functional Height - Inch: Functional height - inch (HF): 0.217
• Functional Height - MM: Functional height - millimeter (HF): 5.5
• Functional Length - Inch: Functional length - inch (LF): 5.906
• Functional Length - MM: Functional length - millimeter (LF): 150
• Functional Width - Inch: Functional width - inch (WF): 0.354
• Functional Width - MM: Functional width - millimeter (WF): 9
• Inclination Angle: Inclination angle (LAMS): -5 Degrees
• Min Bore Diameter - Inch: Minimum bore diameter - inch (DMIN): 0.591
• Min Bore Diameter - MM: Minimum bore diameter - millimeter (DMIN): 15
• Rake Angle: Ortogonal rake angle (GAMO): 0 Degrees
• Shank Height - Inch: Shank height - inch (H): 0.433