Vernier Caliper 6" 0-150mm/0.02mm Metal Calipers Gauge Measuring Tools Boxed(Caliper)

CalipersProduct name :0-150mm carbon steel vernier caliperProduct process: surface plating treatment/laser markingProduct Usage: Outside diameter/inside diameter/step/depth measurementMaterial: Carbon steelError value :±0.02mm1. Outer diameter measurement: Measure the outer size and fit the two measuring surfaces with the measured surface2. Inner diameter measurement: To measure the size of the inner hole, the measuring claw should be measured upward in the diameter of the hole, and can not be skewed3. Depth measurement: To measure the depth, the depth measuring rod should be perpendicular to the bottom of the object to be measured4. Step measurement: Measure the step distance, parallel the measuring claw at the bottom of the step rule to the bottom end of the measured object, and measure the topMeasuring claw close to the top of the object to keep parallel, not skew0-150mm carbon steel vernier caliper Reading method:1. Read the value of the O point of the sub-scale scale on the main scale, that is, the main scale is between 37-38MM. A'sPosition =37MM2. The main scale and the secondary scale are in a line, read the secondary scale, that is, the secondary scale is between 3 and 4,B's position =0.353. Read value read :37+0.35=-37.35MM==========Battery Included : NoHigh-concerned chemical : NoneCertification : DIY Supplies : MetalworkingModel Number : TON-UY0015Origin : Mainland Material : Carbon SteelAccuracy : 0.02mmMeasurement Range : 0 - 150 MMCaliper Type : Vernier Calipers

• Calipers
• Vernier Caliper 6" 0-150mm/0.02mm Metal Calipers Gauge Measuring Tools Boxed