Mister Landscaper Patio & Potted Plant Drip Watering Kit

This complete kit comes with 30-ft of Vinyl, a 150 Mesh Faucet Filter, a 1/4-in faucet adapter, and 8 newly designed Adjustable Dripper Stakes, to attach to any outdoor faucet to drip water into 8 potted plants or spray water for only 5 plants Each of the 8 included Adjustable Dripper Stakes are adjustable by turning the top dial to water from 0 to 10 GPH and releasing drops of water up to spraying 8 individual streams of water in a 2.5-ft diameter. The newly designed Stakes are designed with a "hard stop" cap so that the cap cannot come off if it is rotated too to the left. Use one of the 8 included 1/4-in Vinyl Tee Fittings to run the Vinyl to the Adjustable Dripper Stakes and push the 1/4-in Vinyl end onto the 1/4-in barb inlet on the side of the Stake. If you later decide to use our ½-in Poly as the main line, use one of the 8 included 1/4-in couplers to run lines of the 1/4-in vinyl from the 1/2-in poly tubing over to the Adjustable Dripper Stake. Use the Included All-in-One Punch Tool to assist in installing the ¼-in Fittings into the ¼-in Vinyl or later into the 1/2 in Poly Tubing

• Made in the USA
• In under thirty minutes have this kit installed, watering up to 8 Potted plants
• By tightening the top, dripper stakes can be shut off completely for added control
• We recommend using our 25 psi pressure regulator (mld-25pr) with any drip system
• We also recommend using one of our faucet filters (mlff-41, mlff-150) with any drip system